2025/05/27

What sensors are there in a screw air compressor?

Screw air compressor sensors typically include temperature and pressure sensors. The temperature sensor is installed at the exhaust end of the main unit and connected to the PLC at the other end. It measures the temperature of the exhaust gas and displays it on the screen, allowing for intuitive monitoring of the gas temperature. The pressure sensor is located at the air compressor exhaust outlet and connected to the PLC at the other end. It measures the exhaust air pressure and displays it on the screen. The pressure gauge on the oil separator detects the pre-filter pressure, while the pressure sensor detects the post-filter pressure. When the pressure difference between the two exceeds 0.1 MPa, the oil separator element should be replaced.

Tag:


2025/05/27

What should be paid attention to in the daily use of screw air compressors?

Screw air compressors have a long service life, generally more than 10 years, but this does not mean that once purchased and put into production, they can be used indefinitely. Like other mechanical equipment, air compressors require regular maintenance and upkeep during use to maintain good operating condition and effectively extend their service life. I. The service life of air compressor lubricating oil is generally around 2000 hours, and it must be replaced after expiration. When replacing, not only should the lubricating oil in the oil tank be drained, but also the residual oil in the oil shut-off valve, oil cooler, and oil pipeline should be completely drained to ensure the cleanliness of the newly added oil. When selecting,

Tag:


2025/05/27

The role and precautions for using compressor lubricating oil

Different grades of lubricating oil should not be mixed. Mixing oils of different qualities and grades will reduce the performance of the oil and produce viscous deposits and varnish-like precipitates, clogging the oil supply system and affecting the oil delivery. Under normal circumstances, the oil in the oil cooler, oil-gas separator, and oil system should be replaced every 2000 hours, and the filter should be replaced or cleaned at the same time. If working in a dusty or high-humidity environment, the oil change interval should be shortened. Currently, lubricating oil is generally subjected to regular sampling analysis, and the decision of whether to change the oil is made based on the sampling results. Factors affecting the service life of the oil include: 1. The inhaled air contains dust, iron oxide, carbon dioxide, etc., which can be added

Tag:


2025/05/27

How to clean the compressor lubrication system?

Regular cleaning of the compressor's lubrication system can prevent excessive impurities from contaminating the system and causing serious equipment malfunctions. How should the compressor lubrication system be cleaned? What should be noted during cleaning? Now is the time for Q&A. During the long-term operation of the compressor, internal impurities accumulate over time. Failure to clean them promptly will affect equipment operation and cause serious equipment malfunctions. Therefore, cleaning the compressor lubricating oil is urgent. Before cleaning, carefully clean the inside of the oil tank, check if the pressure transducer, oil pressure switch, and valves are functioning properly, and close the oil tank, oil cooler, and oil filter.

Tag:


2025/05/27

The company participated in the drafting of the Group Standard for Centrifugal Compressors

Previously, China lacked an executive standard for centrifugal compressors. The newly released "Centrifugal Compressor Group Standard," organized by the Compressor Branch of the China General Machinery Association, fills this gap. This provides a basis for production and inspection for both the compressor industry and users. China Aero Engine Dong An was fortunate to participate in the drafting and compilation of this standard.

Tag:


2025/05/27

How to choose the oil for a screw air compressor? These principles must be followed

Since oil is crucial to machine operation by reducing friction and surface temperature between metal parts, the choice of oil is vital to the machine's lifespan. Therefore, the selection of screw air compressor oil must adhere to the following requirements: 1. Stability: The stability of a good compressor oil is mainly reflected in the generation of sediment during use. This sediment affects the oil and the compressor's operation. Excessive sediment can damage the machine. Poor-quality oils produce unstable and uncontrollable amounts of sediment. 2. Viscosity

Tag:


2025/05/27

How to fix compressor overheating protection

The core solution for compressor overheating protection includes cleaning the heat dissipation parts, checking the refrigerant level, maintaining the power system and avoiding overload operation.

Tag:


2023/10/20

Can an oil-free air compressor provide a more stable air pressure supply?

In the industrial field, a stable air pressure supply is crucial for the smooth operation of various processes. Oil-free air compressors have a clear advantage in this regard, providing a more stable air pressure supply to ensure production efficiency and product quality. Traditional lubricated air compressors require lubricants to reduce friction and wear during operation, protecting the normal operation of the equipment. However, this lubricant often mixes into the compressed air, causing unstable air pressure. The mixing of lubricants can cause blockages in the inner walls of pipes and filtration equipment, thereby affecting the transmission of compressed air. In addition, due to the evaporation and deposition of lubricants, moisture in the air will mix with it, causing unstable air pressure fluctuations and bringing a series of problems to the shop's processes.

Tag:


< 12 >

Focus on the research, development, production and sales of high-speed direct-drive permanent magnet variable frequency centrifugal compressors.

All
  • All
  • Product Management
  • News
  • Introduction
  • Corporate Outlets
  • FAQ
  • Corporate Video
  • Corporate Brochure